TWO-LEAF plaster FRAME for SLIDING DOOR
Double panel plaster
Against frame that allows you to do away with two sliding doors one on the right and one to the left of the opening in a masonry wall.
available size cm:
120 x 200-bed 140x210-140x200-140x210-160x200-160x210-180x200-220x200-220x210-200x200-200x210-King size ornate-240x200-240x210
Thickness mm:
finished wall thickness mm internal seat 90 mm-56
finished wall thickness inner seat 105 mm-70 mm
finished wall thickness mm internal seat 125 mm-90
finished wall thickness mm internal seat 145 mm-90
• The bins are made of galvanized steel with thickness of the sides and rear profile of 0.5 mm, while for upper and lower profiles the thickness is 0.8 mm.
• The sides of the bins are made of 100 mm wide vertical trapezoidal. The Greeks give greater rigidity to the structure. On the side there is a mesh that allows a good fastening of the plaster. With the housing it is recommended to use a fine mesh fiberglass, to be placed at the top at the Union between box and wall, protecting from potential cracks the plaster. The network is to be placed on both sides.
• The frames are complemented by plug spacers needed for installation.
The sliding system consists of:
A profile aluminium guide with PVC side profiles that define the thickness of the finished wall. In the wood stud side traverse is secured with nails pre mounted while in the dumpster for slip.
A couple of blocks with ball bearings capacity 120 kg. The carriages are equipped with bolts and suspension brackets and latch bar to mount the door panel.
MADE IN ITALY!
All prices include VAT
Be wary of products on the market much cheaper!!