FRAME for SLIDING DOOR plaster
available size cm:
60x200-60x210-65x210-70x200-70x210-75x210-80x200-80x210-85x210-90x200-90x210-100x200-39x83 "/100x210-110x200-110x210-120x200-bed 140x210
-105 mm wall thickness
-thickness inside mm 70
• The casing is made of galvanized steel. The thickness of the sides and rear profile is 0.5 mm, while for upper and lower profiles is 0.8 mm.
• The sides of the box consists of trapezoidal sheet vertically with 100 mm step. L gives greater rigidity to the structure. On the side there is a mesh that allows a good fastening of the plaster. With the housing it is recommended to use a fine mesh fiberglass, to be placed at the top at the Union between box and wall, protecting from potential cracks the plaster. The network is to be placed on both sides.
• The frames are complemented by 2 plug spacers needed for installation.
The sliding system consists of:
A profile aluminium guide with PVC side profiles that define the thickness of the finished wall. In the wood stud side traverse is secured with nails pre mounted while in the dumpster for slip.
A couple of blocks with ball bearings capacity 120 kg. The carriages are equipped with bolts and suspension brackets and latch bar to mount the door panel.
MADE IN ITALY!
All prices include VAT
Volume discounts apply
Be wary of products on the market much cheaper!!